MAGPro2 X17 software ver 9.4.0 released.
Wednesday, 04 February 2015
by admin
Protocols added: – VAG Gearbox TCU Bosch GS19: OBD R/W/CHK – BMW Fxx petrol DME8 controllers: BL IROM R/W/CHK, EEPROM R/W/CHK, OBD* (using Wizard plugin) DME8 MEDV17.2 DME8 MEDV17.2.4 DME8 MEDV17.2.6 DME8 MEDV17-26 DME8 MEDV17.2.9 – PSA Hybrid Bosch HCU17.4: BL IROM R/W/CHK, EEPROM R/W/CHK – MAZDA Denso family: OBD R/W/CHK DENSO R2AA DENSO R2AB
- Published in Flex Updates
X FLASHER ver 1.3.0 released
Wednesday, 28 January 2015
by admin
-Added support of DME8 controllers: BL IROM R/W/CHK, EEPROM R/W/CHK, OBD* (using Wizard plugin) BMW Fxx petrol DME8 MEDV17.2 BMW Fxx petrol DME8 MEDV17.2.4 BMW Fxx petrol DME8 MEDV17.2.6 BMW Fxx petrol DME8 MEDV17-26 BMW Fxx petrol DME8 MEDV17.2.9 -added new checksum algos (dynamic RSA) -New manuals available on MMS Helpdesk
- Published in Flex Updates
MAGPro2 X17 software ver 9.3.0 released
Monday, 22 December 2014
by admin
Protocols added: – FORD EDC17C10 TPROT12 OBD R/W/CHK – no need to perform unlock by BL. You can R/W by OBD! – FORD EDC17C10 TPROT12 bootloader IROM R/W/CHK, EEPROM R/W/CHK , PASS READ – VAG ME17.5.24 – OBD R/W/CHK, PASS READ List of supported vehicles: Bugfixes: – BMW EDC17C56 – new CHK algo
- Published in Flex Updates
MAGPro2 X17 and T-BOOT ver 9.1.0 released
Saturday, 29 November 2014
by admin
New protocols added: 1. all BMW Fxx series are supported now directly without sending ECUs to our lab. PASSWORD READING solution for the BMW F Series vehicles which were released in the last update of X17 (ver9.0.0) both for X17 and for T-BOOT is now available without shipping ECU by using a new plugin: MAGP1.18
- Published in Flex Updates, Info and Communication
MAGPro2 x17 ver.9.0.0 released
Thursday, 06 November 2014
by admin
Protocols added: 1. BMW Fxx series DDE8 Tricore Bootloader – IROM 4MB R/W/CHK – EEPROM 128kb R/W/CHK Supported Engine models: – D20D, N47, N57 and N57-D30B-D30C Before allowing operations by Bootloader the ECU must be unlocked. The ECU must be sent to a MMS Service Point and it will be sent back to the customer on the
- Published in Flex Updates
MAGPro2 X17 and T-BOOT software ver 8.9.9 released
Monday, 08 September 2014
by admin
ADDED PROTOCOLS: – Bootloader Nexus MPC55xx (CHK AUTO) New solution to read and write micro and eeprom without soldering multiple pins (in most cases it is necessary to connect it to only one pad on the ECU board). SUPPORTED MICROS: MPC5534 MPC5553 MPC5554 MPC5561 MPC5565 MPC5566 MPC5567 SUPPORTED EEPROM: 25LC256 ST95640 ST95320 VEHICLES ADDED: You can
- Published in Flex Updates