×

VOUS AVEZ OUBLIÉ VOS IDENTIFIANTS ?

CRÉER COMPTE

Want to be updated with our latest offers?

MAGPro2 - modular solution for automotive repair and chiptuning shop

MAGPro2 is a complete set of tools, accessories and services. MAGPro2 tools support the control units of vehicles produced from 1999 up till today. This system can be used to reprogram control units for power increase or conservation as well as to reconfigure reconditioned ECUs by rewriting the whole content. MAGPro2 tools offer advanced recovery functions. Users of MAGPro2 tools are assisted by a team of technicians. Online chat and a database of files and manuals are only a few of the services offered by the MMS Helpdesk.

MAGPro2 X17 tool is a solution for cars equipped with EDC16, EDC17, MED17, MED9, MEDV17, Marelli 6/8, Denso, Delphi and other state of the art ECUs.

The device supports CAN-bus (ISO 15765-4 & SAE-J2234), K-line (ISO 9141-2 & ISO 14230-4), TP2.0 and UDS protocols. In most cases checksum correction is done on the fly without an online connection. It includes a Breakbox interface with cables which allow operations on TRICORE & Nexus equipped ECUs by bootloader. Thanks to the accessories which can be added to the package, this procedure is made much easier and safer.

Additional services such as DPF-OFF, Immo OFF, Hot Start, AdBlue OFF, Swirl Flaps OFF, ECU Clone, ORI database, etc. are available for all master users of X17 tools. The tool is available in MASTER and SLAVE versions. For the first year the updates and support are included in the sale price.

SKU TYPE OPTIONS
MAGP1.2(M&S),
main module master / slave
VEHICLE TYPES MODE
 bikes, cars, trucks, bus,
tractors and boats
OBD, bench, bootloader
MAIN FUNCTIONS AVAILABLE SERVICES
map zone/full
IROM/XROM/EEPROM
Read/Write/Checksum
MOD, DPF-OFF,
EGR-OFF, Swirl Flaps,
Immo switch, ECU clone
AdBlue OFF, Speed Limiter
# SKU code Quantity Description
1 MAGP1.2M/S 1 MAGPro2 X17 interface MASTER/SLAVE
2 MAGP0.2.4 1 standard OBDII cable CAN/J1850/K-Line
3 MAGP1.20 1 Breakbox v2 interface
4 MAGP0.2.3 1 universal cable for Breakbox v2
5 MAGP1.21 1 power supply adapter 220v 4A
6 MAGP0.2.16 2 USB 2.0 connection cable 1.8m
7 MAGP0.2.18 1 RJ-45 connection cable 30 cm
8 MAGP0.2.37 1 Toyota K-Line OBD Cable Adapter
9 MAGP0.3.23 1 Challenger Clip
10 MAGP0.5.15 1 Large Round FAST-ON Adapters for Breakbox Free Colored Wires Cable (set 6pz for TCU)
11 MAGP0.5.16 1 Large FAST-ON Adapters for Breakbox Free Colored Wires Cable (set 6pz for TCU)
12 MAGP0.5.1 1 set of BOOT resistors 100Ohm/1kOhm
13 MAGP0.4.1 1 suitcase
14 MAGP0.6.1 1 12 month free updates & Helpdesk access

  1. Installing MAGPro2 X17

  2. Software REV 7 fuctions preview

  3. SIMOS PCR 2 1 unlock and OBD tuning

  4. VAG DSG controller cloning

  5. Audi Q5 2.0TDI MY2012

  6. Toyota Denso by OBD

  7. [/haccordion] ...

The TCU MANAGER is a tool designed to reprogram and clone the most state of the art automatic gearboxes. It is essential for professional mechatronics as well as for amateurs. The tool is also suitable for racing use: ECU remapping also requires TCU remapping in order to supply correctly balanced power.

The TCU MANAGER is able to fully satisfy the needs of any type of customer, providing full clonation of the data from the original source to the used TCU, providing cheap and eco-friendly services! The most common gearbox connectors (DSG) are purchasable separately from our website, with the usual quality guaranteed only by MAGICMOTORSPORT.

Thanks to the support provided by our staff it is easy to offer top-quality service even on very expensive units, with no risk of damaging them!The annual subscription for TCU Manager users has a discounted price (400€ + VAT) and is free for the first year after the purchase of the tool.You are guaranteed access to updates, utilities such as our ORI file databases, manuals that allow you to work in total security and video tutorials. Last but not least, every user has access to our Helpdesk with Technical Support available by chat, phone, Ticket system or remote support !

SKU TYPE OPTIONS
MAGP1.17M standalone master/slave 
VEHICLE TYPES MY RANGE MODE
 cars 2003 -> today OBD
MAIN FUNCTIONS AVAILABLE SERVICES

FLASH/EEPROM

Read/Write/Checksum/Cloning

MOD files

TCU cloning

# SKU code Quantity Description
1 MAGP1.17M 1 TCU MANAGER interface MASTER
2 MAGP0.2.4 1 Connection cable: OBD male to RJ45
3 MAGP0.2.16 1 Connection cable: USB 2.0 AM-BM BLK 1.8 m
  1. Accordion pane 0 content
  2. Accordion pane 1 content
  3. Accordion pane 2 content
  4. ...

The T-BOOT boot loader tool supports Infineon TRICORE and Nexus Freescale MPC55xx based on ECUs including the latest anti-tuning protections and all types of XROM memories: SPANSION: CD016J, CD032J and also the newest: CL016J and CL032J. All checksums are calculated on the fly automatically.

T-BOOT together with other MAGICMOTORSPORT accessories launched a new quality in Tricore chip tuning:
- no soldering (optional MAG Bench with adapters: universal boot, main Tricore (etc);
- no short-circuits from wrong wire connections (optional ECU Connectors);
- no problems with the power supply (optional Breakbox ver 2.0): including monitoring software for the power supply, current, communication lines etc.

The T-BOOT software offers automatic backup of ECU contents as well as recovery functions already seen in the X17 tool recovery functions (for example you can restart the IROM/XROM writing procedure even if it has been interrupted).

T-BOOT like all our other tools is covered by our online Tech Support through chat, email, Ticket & phone. The new tool is available in Master and Slave versions. For the first year the updates and support are included in the sale price.

SKU TYPE OPTIONS
MAGP1.5M/S main module master / slave
VEHICLE TYPES MY RANGE MODE
 bikes, cars, trucks, buses, tractors and boats 2006 -> today bootloader
MAIN FUNCTIONS AVAILABLE SERVICES
map zone/full
IROM/XROM/EEPROM
Read/Write/Checksum
MOD, DPF-OFF,
EGR-OFF, Swirl Flaps,
Immo switch, ECU clone
AdBlue OFF, Speed Limiter,
# SKU code Quantity Description
1 MAGP1.5M/S 1 MAGPro2 T-BOOT Standalone interface MASTER/SLAVE
2 MAGP1.20 1 Breakbox v2 interface
3 MAGP0.2.3 1 universal cable for Breakbox v2
4 MAGP1.21 1 power supply adapter 220v 4A
5 MAGP0.2.16 2 USB 2.0 connection cable 1.8m
6 MAGP0.2.18 1 RJ-45 connection cable 30 cm
7 MAGP0.5.1 1 set of BOOT resistors 100Ohm/1kOhm
8 MAGP0.4.1 1 suitcase
9 MAGP0.6.1 1 12 month free update & Helpdesk access
  1. Installing MAGPro2 T-BOOT

The MAGPro2 BDM programmer is a modern device that allows you to read, program, backup, and restore the three main ECU components with the Motorola Microprocessor Series MPCXX inside the ECU and it supports many cars, bikes, trucks and tractors.

The communication between the BDM programmer and the ECU takes place by using 8 cables and a bench with special adapters (optional). There is NO need to solder any contact strip bars on to the BDM port of the ECU in order to create a connection on the board. Backup/Restore functions allow you to read all the contents of the ECU in a single file. The accuracy of this reading is ensured by a special software procedure that automatically checks the data. Security is furthermore ensured thanks to automatic checksum corrections during the writing procedure. Through these two functions you can always undo the operations and restore the initial conditions of the ECU (except for physical ECU damages).

What's more: thanks to the Backup/Restore functions you can also create a copy of the ECU which can be used with a different hardware, in case the original one was either destroyed or merely damaged.

The BDM Programmer is available as an add-on module for the MAGPro2 X17 tool and the MAGPro2 T-BOOT. We strongly recommend you to use the MAGPro2 BDM MPC5xx with a MAG Bench (optional).

SKU TYPE OPTIONS
MAGP1.16M, MAGP1.16S plugin master / slave
VEHICLE TYPES MY RANGE MODE
 bikes, cars, trucks, bus, tractors 2002 - 2010 BDM port
MAIN FUNCTIONS AVAILABLE SERVICES
micro/ext.flash/EEPROM
Read/Write
MOD, DPF-OFF,
EGR-OFF, Hot Start,
Immo switch, ECU clone
# SKU code Quantity Description
1 MAGP1.16S/M 1 MAGPro2 BDM MPC5xx plug-in MASTER/SLAVE
2 MAGP0.5.4 1 RJ45 Plug In Adapter for BDM

  1. Installing BDM MPC5xx / BDMv3

  2. How connect to MAG Bench

 

 

To take advantage of the DPF fix function, you must send us by Ticket the content of the ECU. In some cases it is necessary to perform additional operations through diagnostic tools. This service is offered only for vehicles destined for off road use and special applications.

  • It's illegal to remove the DPF filter if the car is homolagated with it.
  • MAGICMOTORSPORT is not responsible for the improper use of this service.
  • This service is free of charge only for registered customers with a Master account.

 

Contact Tech Support to confirm the availability of this service for specific types of ECUs.

 

To take advantage of the Immo removal function,you must send us by Ticket the entire contents of the ECU obtained through- MAGPro2 BASE OBD - BDM - X17- or Tricore Bootloader.

  • MAGICMOTORSPORT is not responsible for the improper use of this service.
  • This service is free of charge only for registered customers with a Master account.

 

Contact Tech Support to confirm the availability of this service for specific types of ECUs.

 

 

  • If the engine needs a long cranking when it is hot, the problem may be caused by maps in the ECU.
  • We can correct this problem by simply modifying the cranking maps.
  • This service is free of charge only for registered customers with a Master account.

 

Contact Tech Support to confirm the availability of this service for specific types of ECUs .

 

If for any reason you need to restore the original contents of your ECU (locked by writing a wrong file, etc) and you don’t have the tools to execute this operation (BDM or Boot loader) you can request an ECU recovery by our Team.

  • login to our Helpdesk and send a Ticket from the Repair Request dept.
  • describe your problem
  • specify the type of ECU and attach the contents of the ECU and we will instruct you how to send your package
  • in a few days you will receive the recovered ECU (if the damage is not irreversible)

 

This service is free of charge only for registered customers with a Master account (except for the shipping costs).

 

STATS

400+

AVAILABLE PROTOCOLS

6700+

SUPPORTED VEHICLES

5195+

SERVICES LAST MONTH

45+

PROTOCOLS IN DEVELOPMENT
VAG TPROT10 BOOT & OBD EXAMPLE
GEARBOX CONTROLLER - SPECIAL FUNCTIONS
HELPDESK FUNCTIONS
USEFUL ACCESSORIES

Why choose MAGPro2 ?

NO HIDDEN FEESNO HIDDEN FEES

User accounts are subject to a single annual fee even if more than one module is registered to it. Users must maintain the active status of their accounts in order to be able to use all the functions of their tool and to benefit from our Lifetime Limited Warranty. Arrears subscriptions can be renewed even after years.

ADDITIONAL SERVICESADDITIONAL SERVICES

The MMS Helpdesk provides additional services for racing purposes: power MOD Stage 1 & 2, economy MOD, DPF-OFF, EGR-OFF, Immo-OFF, ECU reconfiguration. You can also clone engine and gearbox unit controllers.

MULTILANGUAGEMULTILANGUAGE

The language barrier does not exist. Our team is ready to help you in Italiano, Polski, Spagnolo, Romanian, Français, Nederlands and Deutsch.

FULL ECU CONTENTFULL ECU CONTENT

This is the most important function in an electronic repair shop: you have access to all contents of the control unit (boot loader mode). We do not add tags or crypt/remove any part of the original ECU readout.

PROFESSIONAL SUPPORTPROFESSIONAL SUPPORT

Our technicians are ready to help you whenever necessary. You can contact us by phone, Ticket system or online chat. We are also ready to help you resolve technical issues which have not been caused by one of our tools for example diagnostic or engine electronics problems.

KNOWLEDGEBASEKNOWLEDGEBASE

The MMS Helpdesk provides access to a knowledgebase full of resources such as user manuals, tech courses, training videos, trouble-shooters and "How tos" as well as a database of original ECU contents

RECOVERY ON SITERECOVERY ON SITE

Recovery on site, MCU reballing and the ECU clone function guarantee fast solutions to damages caused by daily use. Most of these services are included in the annual fee.

TESTIMONIALS

What are our Customers saying about us?
  • I'm very happy with your services. I was a newbie in the chiptuning business and with your support and advice now I'm a pro.
    Paul Simon // Repair workshop
  • With Tricore EEPROM checksum feature I'm the only one in my zone who provides advanced services for new cars. I'm a happy camper now.
    Arnaud // Chiptuning company

LASTEST NEWS

TOUT VOIR -
HAUT


support

NEED ASSISTANCE?